Working Conditions - PYD Electrobombas KS Serie Manual De Instalación Y Mantenimiento

INSTALLATION AND MAINTENANCE MANUAL
BILGE PUMP KS
1. PRODUCT SPECIFICATIONS
ENG
1) Motor and pump body are made of stainless steel/cast iron for high durability.
2) Highly increased maximum immersion depth due to double mechanical seal resistant to
high pressures (0.5 MPa).
3) Efficient motor cooling thanks to the incorporation of a discharge channel as part of the
motor housing. Space-saving due to top outlet.
4) Discharge from 50 mm (2'') to 150 mm (6''), motor between 0.25 KW (0.35 HP) and 11
KW (15 HP).
5) Hermetically sealed motor equipped with internal thermal protection.

2. WORKING CONDITIONS

1) The received voltage must be within ±5% of the nominal voltage.
2) To use the pump, the water temperature should be between 0ºC and 40ºC.
3) The pump should only be used for pumping pure water, never for pumping other fluids
such as oil, salt water or organic solvents.
4) The pump must not be used for transferring flammable liquids, nor must it be operated
near an area where flammable products may be present.
5) The pump must not be used partially disassembled.
6) Maximum immersion depth: 50 m.
www.proindecsa.com / [email protected]
10