HTW SMART PLUS -TV-030SMPLUS Manual De Usuario E Instalacion página 20

Hot water
Cautions
During heating, there may be drops of water dripping from the pressure release
hole of the multifunction valve. This is a normal phenomenon. If there is a large
amount of water leak, please contact customer care center for repair. This
pressure release hole shall, under no circumstances, be blocked otherwise, the
heater may be damaged, even resulting in accidents.
The drainage pipe connected to the pressure release hole must be kept sloping
downwards.
Since the water temperature inside the heater can reach up to 75°C, the hot
water must not be exposed to human bodies when it is initially used. Adjust the
water temperature to a suitable temperature to avoid scalding.
Power supply cord
Multifunction valve
Cold water
(Fig.6)
pressure release hole
17
ELECTRIC
WATER HEATER
SMART PLUS
thread screw
drain handle
(Fig.7)