HTW SMART PLUS -TV-030SMPLUS Manual De Usuario E Instalacion página 19

network mode.
② "Temp" button: under instant heating mode, tap this button to increase the
set temperature. The temperature would increase by 1°C each time. Long
press the key to increase the data rapidly (5 times/S), the temperature range
would be from 30°C to 75°C (it would jump to the lower limit when adjusted to
over the upper limit).
③ "Setting" button: When pressing this button after turning on the machine, it
could choose "Anti-Bacteria" or "Instant heating" working mode.
3. Features:
① Instant heating: under this working mode, after heating to the set
temperature value, it will transfer to the warming state, and when the current
water temperature drops to the value of 8°C lower than the set value [set
temperature -8°C], it will start heating to the set temperature again, and keep
the cycle going.
② Anti Bacteria: under this mode (the temperature is not adjustable), the
system will enter the heat preservation state after heating to 80°C, and return
to instant heating after 30 minutes of heat preservation.
③ Anti-frost: Under standby mode, when the temperature of the water in inner
tank is lower than 5°C, the anti-frost heating function will be activated, and the
"Heating/heat preservation" function light will flash at 1Hz, and the heating will
stop when heated to 10°C and standby; if the machine is on, the system would
heat in normal mode.
④ Timing: set the appointment water time via APP, and the water heater would
heat to the set value before the appointment time.
⑤ Smart Mode: The system would memorize the user's three-day water
consumption habits and automatically adjusts the set temperature.
⑥ Failure and protection: When there are dry-heating failure, sensor failure,
over-heat failure, the digital screen displays the corresponding failure code,
the electric water heater would immediately disconnect the electric heating
elements power supply, any button operation is invalid. Only after fixing the
failure with power off, then turn on power again, can the fault protection
function be quit.
16
ELECTRIC
WATER HEATER
SMART PLUS