Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Make sure the mains data correspond to what is described
on the data plate of the appliance.
• Arrange cord away from traffic areas so that it will not be
tripped over.
3 - USE
Knob "14"
• Knob set to "O" :
• "ECO-MODULATING" :
• "MEDIUM POWER" :
• "MAXIMUM POWER" :
• "TURBO" :
Knob "13" - Thermostat
•
Start the appliance by rotating the knob (14) to the desired power position; the
indicator (12) lights up.
• To set the room temperature to a specific value (thermostatation), rotate the knob
"13" clockwise until it stops (position "MAX").
• Once the desired temperature of the room has been reached, slowly rotate the
knob "13" anticlockwise until the appliance switches off.
• At this point, the appliance will reactivate automatically when the room
temperature lowers beyond the set limit and will switch off again once the room
temperature reaches the set value.
Knob "5" - Mode
By means of the switch (5a) it is possible to select
three different modes:
• Continuous mode "I", it is possible to select the
selected room temperature.
• Timer mode "
switching off of the appliance.
• Continuous mode "0", it is possible to switch off
the appliance.
•
To completely switch off the appliance:
-
place the knob (14) yo position "0"; the LED (12) switches off.
Disconnect the plug from the power socket.
appliance OFF
rotate the knob to " ECO " position.
rotate the knob to "
rotate the knob to "
rotate the knob to "
", it is possible to set a timer for
" position.
" position.
" position.
EN- 13
CALDORAD
5a
Tabla de contenido
