Technoline WT 482 Manual De Instrucciones página 13

During reception, press
Indication:-
When strong DCF signal is detected, display shows with 3 bars
When weak or no DCF signal is detected, display shows
During reception, the signal strength may move from 1 bar to 2 bars to 3 bars. This is normal since
the clock is detecting DCF signal and other signals in the air at the same time.
Press SET will return to the time display with
Successful reception or failed reception
LED becomes static on (stop blinking) when reception is successful
LED disappears when reception is failed
Automatic reception and Manual Reception
Your clock starts automatic reception everyday at 1:00, 2:00, and 3:00. If it fails to receive the DCF
time signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it
fails again, it will start automatic reception at 1:00 again in the next day.
Manual reception: simply press and hold
hold / WAVE to stop DCF reception.
When your clock radio is receiving the radio controlled time signal, the display will turn dimmer. It will
resume to the brightness level which you originally selected after the radio controlled time reception
is completed.
During RCC reception, LED becomes dim and all buttons do not function except the
button.
SETTING TIME, 12/24HR TIME AND THE SNOOZE DURATION
1. Press SET once, 00 flash, press
"00" = GMT +1 hour (e.g. Germany)
"01" = GMT +2 hours (e.g. Finland)
"-01" = GMT 00 hour (e.g. U.K.)
2. Press SET again, the hour digits flash. Press
rapidly).
3. Press SET again, the minute digits flash. Press
rapidly).
4. Press SET again, the display shows "24Hr" and flashes. Press
"24H" time format.
5. Press SET again, the display shows "05" and flashes. Press
time from 5 to 60 minutes.
/ WAVE once will display reception mode and signal strength
/ WAVE, your clock starts manual reception. Press and
/
or
LED flashing.
to set the time zone: -01 or 00 (default) or 01.
or to set the current hour (hold to advance
or to set minutes. (hold to advance
or to select "12Hr" or
or to select your snooze