Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back of the unit.
Your clock radio is ready to work for you.
BACKUP BATTERY INSTALLATION
Your clock radio requires one CR2032 lithium battery (not included) to provide backup power to the
clock in the event of a temporary power interruption.
1.
Place your unit face down on a flat surface.
2.
Slide and remove the battery cover at the bottom of your unit.
3.
Insert one new CR2032 lithium battery into the battery compartment with the "+" side facing
up as indicated.
4.
Replace the battery cover.
If AC power is interrupted, the LED display will go off and both the radio and the alarm will not function.
The backup battery will keep the time and all settings of your unit. Make sure a fresh CR2032 lithium
battery is used. A fresh CR2032 battery could backup your clock continuously for around 3 days.
ENVIRONMENTAL RECEPTION EFFECTS
Your radio controlled clock radio obtains the accurate time with wireless technology. Same as
all wireless devices, the receiving ability maybe affected by, but not limited to, the following
circumstances:
Long transmitting distance
Nearby mountains and valleys
Among tall buildings
Near railway, high voltage cable etc.
Near freeway, airport, etc
Near construction site
Inside concrete buildings
Near electrical appliances
Near computers and TV's
Inside moving vehicles
Near metallic structures
Place your clock at a location with optimal signal, i.e. close to a window and away from metal
surfaces or electrical appliances.
DCF SIGNAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The
Receiving DCF signal
Successful Reception
Failed Reception
(
LED flashing)
(
LED becomes static)
(
LED disappear)
icon flashes.
Tabla de contenido
