Denon AVR-1802 Instrucciones De Operación página 7

To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can
result in a drop in sound quality.
MASTER VOLUME
TV game
VOLUME LEVEL
OUTPUT
R L OPTICAL
VIDEO SELECT DIMMER STATUS
R L
V.AUX INPUT SURROUND SELECT CH VOL
MODE
OPTICAL VIDEO L AUDIO R
SURROUND TONE
PARAMETER CONTROL
L R
Video camera
OUTPUT
R L VIDEO OUT
R L
AUDIO OUT
VIDEO OUT
Connecting a video component equipped with S-Video jacks
• When making connections, also refer to the operating instructions of the other components.
• A note on the S input jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
• Precaution when using S-jacks
This unit's S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video
signals input from the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output
from the pin jack outputs.
When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections
according to the equipment's instruction manuals.
Monitor TV
S-VIDEO
IN
DVD/ TV/ VCR-1 VCR-2 VCR-1 VCR-2 MONITOR
VDP DBS
AC OUTLET
S-VIDEO
FRONT
CENTER
SUB
WOOFER
PREOUT
SPEAKER SYSTEMS
AC 230V 50Hz
FRONT CENTER SURROUND SWITCHED
100W MAX.
SPEAKER IMPEDANCE
FRONT A OR B / 6 16 CENTER / 6 16
A + B / 12 16 SURROUND / 6 16
TV or satellite broadcast tuner
Connecting a TV/DBS tuner
• Connect the TV's or DBS tuner's S video output
S-VIDEO
jack (S-VIDEO OUTPUT) to the
OUT
IN jack using an S jack connection cord.
DVD player, VDP, etc.
Connecting a DVD player or video disc player (VDP)
S-VIDEO
B
DVD/VDP
OUT
• Connect the DVD player's or video disc player's S-
Video output jack to the S-VIDEO DVD/VDP IN jack
using an S-Video connection cord.
Connecting a TV game equipment
• Connect the TV game equipment's output jacks to
VIDEO OUT
this unit's V. AUX INPUT lacks.
Connecting a video camera equipment
• Connect the video camera equipment's output jacks
to this unit's V. AUX INPUT lacks.
The V. AUX terminal is covered with a cap.
Remove this cap in order to use the terminal. (See
page 3 for instructions on removing the cap.)
Connecting a monitor TV
MONITOR OUT
• Connect the TV's or DBS tuner's S video input (S-VIDEO INPUT) to the
S-VIDEO MONITOR OUT jack using a S jack connection cord.
Video deck 1
S-VIDEO
OUT IN
Connecting the video decks
• Connect the video deck's S output jack (S-OUT) to the
VCR-1 IN jack and the video deck's S input jack (S-IN) to the
S-VIDEO
VCR-1 OUT jack using S jack connection cords.
• Connect the video deck's S output jack (S-OUT) to the
VCR-2 IN jack and the video deck's S input jack (S-IN) to the
S-VIDEO
VCR-2 OUT jack using S jack connection cords.
OUT IN
Video deck 2
S-VIDEO TV/DBS
Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
75 Ω/ohms
COAXIAL
CABLE
FM ANTENNA
ADAPTER
(An Accessory)
FM INDOOR ANTENNA
(An Accessory)
AM loop antenna assembly
Connect to the AM
antenna terminals.
1 2
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a wall.
S-VIDEO
Installation hole Mount on wall, etc.
S-VIDEO
AM LOOP
ANTENNA
(An Accessory)
SIGNAL
PHONO CDR /
GND
TAPE
CDR /
ANTENNA TERMINALS
TAPE
FEEDER
CD MONITOR
CABLE
LOOP
AM
ANT.
DVD / DVD /
VDP VDP
FM
TV / TV /
COAX. COAX.
DBS DBS
75
VCR
VCR-1
-1
VCR
FR FL OPT-1 VCR-2
-2
VCR
SW C OPT-2 VCR-1
-1
AM OUTDOOR
VCR
SR SL OPT-2 VCR-2 ANTENNA
-2
EXT. IN AUDIO DIGITAL VIDEO
GROUND
Connection of AM antennas
1. Push the lever. 2. Insert the
conductor.
3
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure AM loop antenna lead terminals do
not touch metal parts of the panel.
FM antenna adapter assembly
75 Ω/ohms COAXIAL CABLE
Open the cover
PULL
CLAMP
PULL
ANTENNA ADAPTER
REMOVE
5C-2V
CLAMP
75 Ω/ohms COAXIAL CABLE
ENGLISH
3. Return the lever.
SHUT
CLAMP
SHUT
CLAMP
3C-2V 5C-2V
7