Auto Tuning; Manual Tuning; Recalling Preset Stations - Denon AVR-1802 Instrucciones De Operación

Auto tuning

1 3 4
B
2

Manual tuning

1
Set the input function to "TUNER".
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator
turns off.
1 Set the input function to "TUNER".
(Main unit)
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
(Main unit)
3
Press the MODE button to set the auto tuning
mode.
Lit
(Main unit)
4 Press the TUNING UP or DOWN button.
(Main unit)
• Automatic searching begins, then stops when
a station is tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the
"STEREO" indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the "TUNED" and "STEREO"
indicators turn off.
3
Press the MODE button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns
off.
4
Press the TUNING UP or DOWN button to tune
in the desired station.
The frequency changes continuously when the
button is held in.
Preset stations
2 3 1,4
B
V. AUX VCR-1 VCR-2 TV/DBS
3
4
5
6
INPUT MODE CDR / TAPE TUNER SHIFT
2
7 8 9
SURROUND
TAPE · VCR
MODE
6 7
3
CHANNEL
0
3 2 0

Recalling preset stations

1 2
B
V. AUX VCR-1 VCR-2 TV/DBS
3 4 5 6
INPUT MODE CDR / TAPE TUNER SHIFT
1
7 8 9
SURROUND
TAPE · VCR
MODE
6 7
2
CHANNEL
0
3 2 0
Preparations:
Use the "Auto tuning" or "Manual tuning" operation
to tune in the station to be preset in the memory.
1 Press the MEMORY button.
(Main unit)
2 Press the SHIFT button and select the desired
memory block (A to E).
SHIFT
(Main unit) (Remote control unit)
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
3
Press the PRESET UP or DOWN button to select
the desired preset channel (1 to 8).
CHANNEL
(Main unit) (Remote control unit)
4 Press the MEMORY button again to store the
station in the preset memory.
(Main unit)
To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to E.
1
Watching the display, press the SHIFT button to
select the preset memory block.
SHIFT
(Main unit) (Remote control unit)
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
2 Watching the display, press the PRESET UP or
DOWN button to select the desired preset channel.
CHANNEL
(Main unit) (Remote control unit)
ENGLISH
21