Surround - Denon AVR-1802 Instrucciones De Operación

ENGLISH

13 SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from each
speakers. This adjustment can be performed from the remote control unit, as described below.
• The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.
The adjusted playback levels for the different surround modes are automatically stored in the memory of each
surround modes.
1
Set the DOLBY/DTS SURROUND (Dolby Pro
Logic II or Dolby Digital or DTS Digital) modes.
SELECT
(Main unit) (Remote control unit)
2 Press the TEST TONE button.
Test tones are output from the
different speakers. Use the
channel volume adjust buttons
to adjust so that the volume of
the test tones is the same for
all the speakers.
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as described below.
1 Select the speaker whose level you want to
adjust.
(Main unit) (Remote control unit)
The channel switches as shown below each time
the button is pressed.
FL CNTR FR SR
SW
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
2
Adjust the level of the selected speaker.
SELECT
(Main unit) (Remote control unit)
16
SURROUND
MODE
T.TONE 1
RETURN
(Remote control unit)
3
After completing the adjustment, press the
(Remote control unit)
TEST TONE button again.
T.TONE
RETURN
(Remote control unit)
B
SL
VIDEO SELECT CD·MD/CDR·DVD/VDP
TITLE
8
6
2
SYSTEM
SET UP
CH SELECT
1
SELECT
T.TONE
RETURN
2
CHANNEL
The level of the selected speaker can be adjusted
within the range of +12 to –12 dB.
Dolby Surround Pro Logic
1
Select the function to which the component you
want to play is connected.
EX:
(Main unit)
2 Select the Dolby Surround Pro Logic II mode.
SURROUND
·
MODE TAPE VCR Select the DOLBY
1
6 7
CHANNEL PRO LOGIC II mode
0
3 2 0
using the SELECT
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
knob.
TITLE
8 3 9
2
6 7
2
SYSTEM SURROUND
SET UP MENU
MASTER
CH SELECT VOL SELECT
2, 3
SELECT
T.TONE STATUS MUTING
2 RETURN DISPLAY
CHANNEL TV VOLUME
(Main unit)
• The Dolby Pro Logic indicator lights.
Display
DOLBY PLII
PLII C DVD
3
Play a program source with the
mark.
• For operating instructions, refer to the manuals
of the respective components.
4 Select the surround parameter mode.
(Main unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
2 1
5 Select the optimum mode for the source.
DISC SKIP+
SELECT
3 9
2
7
SURROUND
MENU MASTER
VOL
(Main unit)
STATUS MUTING
DISPLAY
MODE PRO LOGIC
TV VOLUME
SELECT
II mode
B
DVD/VDP
3
(Remote control unit)
1
The surround mode
switches when the
SURROUND MODE
button is pressed.
Select the DOLBY
PRO LOGIC II mode.
SURROUND
MODE
(Remote control unit)
Light
Display
SURROUND
MODE CINEMA
MENU
6 Set the surround parameters according to the
(Remote control unit)
mode.
• The mode switches as shown below each
time the button is pressed.
(Remote control unit)
MODE CINEMA MODE MUSIC
SELECT
or or
2 4. 6 2, 5, 7
CD MD/CDR
AUDIO VIDEO
POWER
AVR/AVC TV VCR DVD/VDP
ON
PHONO CD DVD/VDP
OFF 1 2 3
V. AUX VCR-1 VCR-2 TV/DBS
4 5 6 7
1
INPUT MODE CDR / TAPE TUNER SHIFT
8 9 0
SURROUND
·
MODE TAPE VCR
2
6 7
CHANNEL
0
3 2 0
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
TITLE
8 3 9
2
6 7
SYSTEM SURROUND
SET UP MENU
MASTER
CH SELECT VOL
4, 5, 6, 7
SELECT
T.TONE STATUS MUTING
RETURN DISPLAY
CHANNEL TV VOLUME
B
REMOTE CONTROL UNIT RC-897
SURROUND
MENU
(Main unit) (Remote control unit)
MODE PRO LOGIC MODE CINEMA MODE MUSIC
CINEMA EQ CINEMA EQ PANORAMA
DEFAULT DEFAULT DIMENSION
CENTER WIDTH
DEFAULT