Technical Data - Black and Decker BDCDD12 Manual De Instrucciones

ENGLISH
IF THE DRILL STALLS:
•
RELEASE TRIGGER SWITCH IMMEDIATELY, remove
-
drill bit from work, and determine cause of stalling.
DO NOT DEPRESS TRIGGER SWITCH ON AND OFF
-
IN AN ATTEMPT TO START A STALLED DRILL—THIS
CAN DAMAGE THE DRILL.
- To minimize stalling or breaking through the material,
reduce pressure on drill and ease the bit through the
last fractional part of the hole.
• Large holes (5/16" to 1/2" [7.9 mm to 12.7 mm]) in steel can
be made easier if a pilot hole (5/32" to 3/16" [4 mm to 4.8
mm]) is drilled first.
• If drilling thin material or material that is prone to splinter,
use a wood "back-up" block to prevent damage to
the workpiece.
MAINTENANCE
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning. Your charger does not require any
maintenance apart from regular cleaning.

WARNING! To reduce the risk of serious personal
injury, turn off the tool and disconnect it from
the power source before making adjustments or
removing / installing devices or accessories. An
accidental start could cause injuries.

IMPORTANT! To ensure product Safety and Reliability,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified organizations, always
using identical replacement parts. Unit contains no user
service able parts inside.
CLEANING

WARNING! Blow dirt and dust from all ventilation ducts
with dry air, at least once a week. To reduce the risk
of injury, always use ansi z87.1 Approved eye protection
when performing this task.

WARNING! Never use solvents or other abrasive
chemicals to clean non-metallic parts of the tool. These
chemicals can weaken the plastic materials used in these
parts. Use a cloth dampened only with water and neutral
soap. Never allow liquid to penetrate inside the tool or
immerse any of the parts in a liquid.
ACCESSORIES
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service center.

WARNING! The use of any accessory not recommended for
use with this tool could be hazardous.
22
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed
of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further use to
you, do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
BATTERIES
BLACK+DECKER batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
• Run the battery down completely, then remove it from the
tool.
• NiCd, NiMH and Li-Ion batteries are recyclable. Take them to
any authorized repair agent or a local recycling station.

TECHNICAL DATA

Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood
Weight
Battery (Not Supplied)
Voltage
Capacity
Type
Charger
Input voltage V
AC
Output voltage V
CD
Output current mA
Approx. charge time Hours
V
DC
Min -1
Nm
mm
mm
kg
V dc
Ah
AR B3 BR B2
100-240
8-20
400
3-4
BDCDD12
12 MAX
0 - 550 RPM
12.5 / 26
1 - 10
10 / 25
0.98
LBXR1512
12 MAX
1.5
Lithium-Ion
B2C