Safety; Proper Use - Fronius MTG 250d Manual De Instrucciones

Safety

Proper use

The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in
manual applications.
Any use above and beyond this purpose is deemed improper. The manufacturer
shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current and risk of injury from the emerging wire electro-
de.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious injury and damage to property.
▶
Risk of burns from hot welding torch components and hot coolant.
This can result in severe scalds.
▶
38
Carefully reading and following all the instructions given in the operating in-
structions
Performing all stipulated inspection and maintenance work.
WARNING!
All the work and functions described in this document must only be carried
out by trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system compon-
ents, especially the safety rules.
WARNING!
Turn the power source mains switch to the "O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all
work has been completed.
WARNING!
All cables, lines and hosepacks must be properly connected, undamaged,
correctly insulated and adequately dimensioned at all times.
CAUTION!
Before commencing any of the work described in these Operating Instruc-
tions, allow all welding torch components and the coolant to cool to room
temperature (+25 °C, +77 °F).