Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Berner BJS-SHO 135 Instrucciones De Servicio

BJS 135.book Seite 8 Montag, 15. November 2004 10:10 10
– Operate the machine with low feed only; the
orbital action and the stroke ensure sufficient
operational progress.
– Always guide the machine firmly against the
parallel guide 24 or an auxiliary guide rail and
avoid lateral pressure against the handle in or-
der to prevent the machine from jamming.
Circle Cutter/Parallel Guide
(Accessory – see figures
With the combined circle cutter/parallel guide 24,
circular cutouts or parallel cuts in materials of up
to 30 mm thickness can be made.

Maintenance and Cleaning

Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and its ventilation slots clean.
In order to avoid operational malfunctions, do
not saw gypsum board from below or over-
head.
In extreme working conditions, conduc-
tive dust can accumulate in the interior
of the machine when working with
metal. The protective insulation of the
machine can be degraded. The use of a
stationary extraction system is recom-
mended in such cases as well as fre-
quently blowing out the ventilation slots
and installing a residual current de-
vice (RCD).
The guide roller 13 should occasionally be
checked for wear and lubricated with a drop of oil.
If it is worn, it must be replaced.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised customer
services agent for Berner power tools.
For all correspondence and spare parts orders,
always include the 6 digit order number of the
machine!
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
live = brown
– ) neutral = blue
G H
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.

Environmental Protection

Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rised recycling.
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 60 745
according to the provisions of the directives
89/336/EEC, 98/37/EC.
Mario Ferretti
Chief Executive Officer (CEO)
Berner GmbH
Bernerstraße 6
D-74653 Künzelsau
Subject to change without notice
English - 8
strain relief
professional only

Declaration of Conformity

Jean-Marie Biren
Chief Operations Officer
Berner (COO)
To be fitted
by qualified