Fitting The Clipperhead - Heiniger OPAL Traducción Del Manual Original

1
1
Fig. 14
1
3
Fig. 15
6.1.3

Fitting the clipperhead

1
Fig. 16
Fig. 17
Translation of the original instructions / Small animal clipper
2 3
2
3
2
2 1
3. Insert the battery (2) in the clipper (3),
until the battery interlock (1) is engaged
on both sides.
4. Insert the clipper with the inserted bat-
tery (1) or insert just the battery (2) from
above without force into the charging
recess provided on the charging station.
5. Waiting for the battery charging time
(3 specifications).
6. Battery is charging. During the charg-
ing time the control light is illuminating
red (3). As soon as the battery has been
charged to a min. 90%, the indicator
lamp will change to green and the charg-
ing station switch to "trickle charging".
7. Hold the charger firmly with one hand
and pull the clipper (1) or the battery (2)
out with the other.
1. If the blade hinge (2) is accidentally clo-
sed, lift the latter up using a screwdri-
ver (1) while simultaneously pressing the
blade interlock.
2. Fit the clipperhead (1) on the open blade
hinge (2).
13