Heating Milk Function; Cleaning And Care - Unold Latte piccolo Manual De Instrucciones

(lower MAX mark). Do not overfill with milk,
as the frothed milk expands and can boil
over.
5. Attach the lid to the kettle jug and turn it
until it is fixed.
6. Press the main switch.
7. The corresponding indicator light shows
that the appliance has started to prepare
the milk froth.

heating Milk function

1. Take the kettle jug from the base.
2. Turn the lid in the direction marked with an
arrow and remove the lid upward.
3. Remove the agitator from the lid.
4. Fill the kettle jug with milk up to minimum
75 ml (MIN mark) and maximum 250 ml
(upper MAX mark). Do not overfill with milk,
as it can boil over.
5. Attach the lid to the kettle jug and turn it
until it is fixed.
6. To prepare hot milk press the main switch.

cleaning anD care

1. Allow the appliance to cool off before cleaning it.
2. Before cleaning, always turn the appliance off and
unplug it from the wall socket.
All manuals and user guides at all-guides.com
8. After approx. 1 to 1.5 minutes the milk
9. Please bear in mind that the preparation
10. Now open the lid and remove it upwards
11. You may now decant or scoop the milk froth
12. If you want to prepare more milk froth, allow
7. The indicator light shows that the appliance
8. Please bear in mind that the preparation
9. Now open the lid and remove it upwards
10. You may now decant the milk to another
11. If you want to heat more milk, allow
12. Tip: After heating the milk, attach the
3. For hygienic reasons clean the appliance immediately
froth is prepared and the appliance shuts
off automatically.
process cannot be interrupted manually. If
you want to switch off the appliance before
the process is finished, disconnect the plug
from the wall socket or lift the kettle jug off
the base.
from the kettle jug.
to another receptacle.
the appliance to cool off for approx. 2 –
4 minutes. Clean the kettle jug as described
in the chapter concerning cleaning and
care.
Important: No milk residue may be left in the
kettle jug in order to avoid germ formation.
clean the appliance after every use.
has started to heat the milk.
process cannot be interrupted manually. If
you want to switch off the appliance before
the process is finished, disconnect the plug
from the wall socket or lift the kettle jug off
the base.
from the kettle jug.
receptacle.
the appliance to cool off for approx. 2 –
4 minutes. Clean the kettle jug as described
in the chapter concerning cleaning and
care.
agitator to the lid so that it will not get lost.
Important: No milk residue may be left in the
kettle jug in order to avoid germ formation.
clean the appliance after every use.
after each use. Otherwise milk residues can lead to
the formation of harmful germs.
15