Before Using The Appliance For The First Time; Removing The Accessory For Milk Froth; Milk Frothing Function; Milk Heating Function - Unold 28400 Manual De Instrucciones

before using the aPPliance for the first tiMe

1. Remove all packaging materials and trans-
port safety equipment.
2. Clean all parts with a damp cloth, as descri-
bed in „Cleaning and Care" on page 19.

Milk frothing function

1. Remove the lid from the jug.
2. Click on the milk froth accessory to the agi-
tator.

Milk heating function

1. Prepare the appliance as described in
„Frothing milk".
2. Click on the milk heating accessory to the
agitator.
3. Add at least 100 ml milk (min. mark), but
no more than 250 ml (top max. mark) to the
jug. Never add more milk, since the milk
may overflow from the jug.
4. Replace the lid.
5. Press the on/off button.
6. The indicator light shows that the appliance
starts heating the milk.
18
3. Check that the appliance stands firmly.
4. Connect the appliance to the power supply
(220-240 V~, 50 Hz) with the cable.
3. Add at least 100 ml milk (min. mark), but
no more than 150 ml (lower max. mark) to
the jug. Never add more milk, since frothed
milk expands and may overflow from the
jug.
4. Replace the lid.
5. Press the on/off button.
6. The indicator light shows that the appliance
starts frothing the milk.
7. If you wish to interrupt the frothing process,
press the on/off button again.
8. The milk froth is ready in about 90 seconds
and the appliance stops automatically.
9. Open the lid and remove it from the jug.
10. You can now pour or spoon the milk froth
into a container.
11. If you wish to froth more milk, allow the
appliance to cool for 2 to 4 minutes. Then
clean the jug as described in Cleaning and
Care.
Important: Make sure that there is
no milk residue in the jug to prevent
germs forming. clean the appliance
after every use.
7. If you wish to interrupt the heating process,
press the on/off button again.