Bead Breaking Through Vertical Rolls - Butler AIKIDO.34LIGHT Manual De Instrucciones

7101-M001-0_B
GB
Page 37 of 111
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI

12.3 Bead breaking through vertical rolls

For what concerns bead breaking, there are two differ-
ent options, which can be activated through the selector
(Fig. 26 Pos. 1).
AUTOMATIC (AUTO)
1. After the wheel has been locked, move upper bead
breaker roll (Fig. 27 Pos. 2) near to the rim edge, pushing the push button (Fig. 14 Pos. C)( ).
2. Determine the tools diameter (rolls and support)
using the push button L and the lever I.
Fig. 27
3. Keep on the approaching movement, activating the
wheel rotation in clockwise sense. The contact be-
tween feeler pin and rim edge will activate automati-
cally the progress of the roll (Fig. 28 Pos. 1), which
will be inserted between the rim (Fig. 28 Pos. 2) and
the tyre (Fig. 28 Pos. 3). The same automatism can
be applyed to the lower roll as well.
Fig. 28
1
3
2
All manuals and user guides at all-guides.com
INSTRUCTION, USE AND
MAINTENANCE MANUAL
4. Draw the lower roll (Fig. 29 Pos. 1) near the push
Fig. 29
Fig. 26
5. Only now rotate the wheel in clockwise sense press-
6. Once bead breaking has been completed in the lower
7. Rotate the rim until the valve is positioned immedi-
2
8. Carry out upper edge bead breaking, in the same way,
1
button (Fig. 14 Pos. D) ( ).
1
ing the pedal (Fig. 15 Pos. A) and at the same time
activate the pushbutton (Fig. 14 Pos. D) ( ), keep-
ing it pressed until bead breaking has been completed.
WHILE THIS OPERATION IS BE-
ING CARRIED OUT PAY ATTEN-
TION NOT TO DEFORM THE
TYRE SIDE. GREASE THE BEAD
BEFORE THE ROLL RE-ENTERS.
part, move lower roll in the rest position activating
the push button (Fig. 14 Pos. D) ( ). The roll re-
enters automatically nullifying the approaching move-
ment described at point 3). This automatism can be
applyed on both arms.
ately at the right side of the roll.
keeping the push button pushed. (Fig. 14 Pos. C)
( ) (see Fig. 30).
WHILE THIS OPERATION IS BE-
ING CARRIED OUT PAY ATTEN-
TION NOT TO DEFORM THE
TYRE SIDE. GREASE THE BEAD
BEFORE THE ROLL RE-ENTERS.
Fig. 30