General Introduction; Intended Use; Training Of Personnel; Safety Devices - Butler AIKIDO.34LIGHT Manual De Instrucciones

7101-M001-0_B
GB
Page 27 of 111
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI
1.0

GENERAL INTRODUCTION

This manual is an integral part of the product.
Carefully study the warnings and instructions contained
in this manual.
It contains important instructions regarding SAFE USE
and MAINTENANCE.
THIS MANUAL SHOULD BE
CONSERVED FOR FURTHER
CONSULTATION.
2.0

INTENDED USE

The model AIKIDO.34LIGHT machine and relative ver-
sions is a disassembling machine for car tires pro-
jected to be used exclusively for the mounting,
demounting, and inflation of wheels with dimensions
of max. diameter of 54" and max. width of 15".
2.1

Training of personnel

The machine may be operated only by suitably trained
and authorized personnel.
Given the complexity of the operations necessary to
manage the machine and carry out the operations safely
and efficiently, the personnel must be trained in such a
way that they learn all the information necessary to op-
erate the machine as intended by the manufacturer.
A careful reading of this instruction manual for use and
maintenance and a short period of training with skilled
personnel can be an enough preventive preparation.
This accessory must only be used for the purpose for
which it is specifically designed.
Any other use is considered improper and therefore
unacceptable.
The manufacturer cannot be held responsible for any
damage caused by improper, erroneous, or unaccept-
able use.
All manuals and user guides at all-guides.com
INSTRUCTION, USE AND
MAINTENANCE MANUAL
3.0
• Non-adjustable pressure limiter.
This allows inflation of tyres in reasonable safety. In-
flation of tyres to over 3,7 ± 0,2 bar (54 PSI) is not
allowed.
• Controls logic disposition
Its function is to prevent the operator from dangerous
mistakes.
3.1
The machine was subjected to a complete analysis of
risks according to reference standard EN 1050.
Risks are as reduced as possible in relation with tech-
nology and product functionality.
Possible residual risks have been emphasized through
pictorial representations and warnings which placing is
indicated in " PLATE POSITIONING TABLE" at page 26.

SAFETY DEVICES

Residual risks