Assembly And Preparation; For Use; Accessories Contained In The Packing; Assembly Procedure - Butler AIKIDO.34LIGHT Manual De Instrucciones

9.0

ASSEMBLY AND PREPARATION

FOR USE

After having freed the various components from the pack-
ing check that they are complete, and that there are no
anomalies, then comply with the following instructions
for the assembly of the components making use of the
attached series of illustrations.
9.1

Accessories contained in the packing

The packing case contains also the accessory box.
Check that all the parts listed are there.
Code
710090780
BEAD PULLER
B1157000 TWO-FACED CONE
710013420 REVERSE WHEELS PROTECTION
710012940
DRIVE PIN EXTENSION
710090480 PIN PROTECTION
9.2

Assembly procedure

1. Assemble "Gonfiatubeless" unit to the machine keep-
ing to the following instructions:
- fix the tank (Fig. 6 pos. 6) to the support flange
(Fig. 6 pos. 7) using the screws (Fig. 6 pos. 4) and
nuts (Fig. 6 pos. 5) equipped on issue;
- fix the flange (Fig. 6 pos. 7) to the machine (Fig. 6
pos. 3) using screws (Fig. 6 pos. 1) and nuts (Fig.
6 pos. 2) equipped on issue;
2. Connect the black pipe (Fig. 7 pos. 1) and the blue
pipe (Fig. 7 pos. 2) to the provided quick couplings
as shown in figure 7.
All manuals and user guides at all-guides.com
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Description
Fig. 6
Fig. 7
Nr
1
1
1
3. Mount the ring (# 0223000) (Fig. 8 pos. 1), with the
1
two screws which are already in place in the machine
1
body (Fig. 8 pos. 2). The grease holder ring can be
mounted in four different positions depending on the
requirements of the user.
Fig. 8
4 . Connect the mains pneumatic power supply by using
the union placed on filter unit of the machine. The
pressurized pipe (see Fig. 9) coming from the mains
must have a section of 10x19.
7101-M001-0_B
Page 30 of 111
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI
GB
Fig. 9