Kohler Comfort Height K-77795-0 Eir Instrucciones De Instalación página 5

2. Prepare the Site - Hardwired
Supply Stop Location
5-15/16" (151 mm)
WARNING: Risk of electric shock. Connect only to a properly-grounded dedicated circuit protected by a Class A
Ground-Fault Circuit-Interrupter (GFCI)*. Use 120 V, 60 Hz, 15 A service.
CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily place a rag in the
floor flange.
IMPORTANT! Do not install items behind the toilet that will interfere with the cover when it is raised. Decorative items
should be at least 42" (1067 mm) high to allow clearance for the cover.
*Outside North America, this may be known as a Residual Current Device (RCD).
Follow the dimensional information exactly when installing a hardwired electrical supply.
Route the branch circuit supply conductors through UL Listed flexible conduit from the junction box or other
approved enclosure to the field wiring compartment at the rear of the toilet as shown and in accordance with local
electrical installation codes.
Kohler Co.
3-15/16" (100 mm)
4-3/4" (121 mm)
12" (305 mm)
10-1/16" (256 mm)
Centerline
5
Floor Flange Location
1295780-2-B