Kohler Comfort Height K-77795-0 Eir Instrucciones De Instalación página 4

1. Prepare the Site - Plug-In
10" (254 mm) – 12" (305 mm)
Supply Stop Location
3" (76 mm) – 6" (152 mm)
WARNING: Risk of electric shock. Connect only to a properly-grounded dedicated circuit protected by a Class A
Ground-Fault Circuit-Interrupter (GFCI)*. Use 120 V, 60 Hz, 15 A service. Do not remove the grounding pin or use a
grounding adapter.
CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily place a rag in the
floor flange.
IMPORTANT! Do not install items behind the toilet that will interfere with the cover when it is raised. Decorative items
should be at least 42" (1067 mm) high to allow clearance for the cover.
*Outside North America, this may be known as a Residual Current Device (RCD).
For hardwired installations, see the "Prepare the Site - Hardwired" section.
Make sure that the supply stop and electrical outlet are located within the supplied dimensions.
Install the electrical outlet at the location shown.
1295780-2-B
10" (254 mm) – 12" (305 mm)
12" (305 mm)
5" (127 mm) – 7" (178 mm)
Floor Flange Location
Centerline
4 Kohler Co.