Use And Maintenance; Up And Down Buttons; Stop Function; Tips And Recommendations For Use - SOMFY Sonesse Ultra 50 Manual

Sonesse Ultra 50 - Sonesse Ultra 50 RH

3. USE AND MAINTENANCE

This motor is maintenance-free
For the safety of goods and people, Somfy motors are equipped with thermal protection that will
trigger the motor stops in the event of overheating.
Repeated activation of this protection can degrade motor performance.
If the motor goes to thermal protection, please check your installation and check that the motor is
rated for the intended use.
A normal installation is not expected to trigger this protection.
To avoid the drift of the end limits, do not cut the power supply more than 1 week.

3.1. UP AND DOWN BUTTONS

V
Pressing the or
motorised product.

3.2. STOP FUNCTION

The motorised product is moving.
Pressing the Stop button stops the motorised product.

3.3. TIPS AND RECOMMENDATIONS FOR USE

3.3.1. Questions about the Sonesse Ultra 50?
Observations
The motorised product
does not operate.
If the motorised product still does not work, contact a drive and home automation professional.

4. TECHNICAL DATA

Power supply
Operating temperature
Index protection rating
Safety level
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection
point for recycling.
SOMFY ACTIVITES SA, F-74300 CLUSES as manufacturer hereby declares that the drive covered by these instructions
when marked for input voltage 230V h 50Hz and used as intended according to these instructions, is in compliance with
the essential requirements of the applicable European Directives and in particular of the Machinery Directive 2006/42/EC
and EMC Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Philippe Geoffroy, Approval manager, acting on behalf of Activity director, Cluses, 07/2019.
Copyright © 2014 - 2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
button fully raises or lowers the
Possible causes
The motor is in thermal protection. Wait until the motor cools down.
230V 50 Hz
1)
2)
120V 60 Hz 220V
0°C to + 60°C
IP 31
Class I
Solutions
60 Hz 100V 50/60 Hz
EN
55