Use And Maintenance; Up And Down Buttons; Stop Function; Favourite Position (My) - SOMFY Oximo 40 WF RTS Manual De Instrucciones

3. USE AND MAINTENANCE

This drive is maintenance-free

3.1. UP AND DOWN BUTTONS

Briefly pressing the Up or Down button causes the motorised product to raise or lower
fully.

3.2. STOP FUNCTION

The motorised product is moving.
Briefly press my: the motorised product stops automatically.

3.3. FAVOURITE POSITION (my)

Besides the upper and lower positions, an intermediate position known as the "favourite
position (my)" is programmed as standard in the Oximo.
To use the favourite position (my):
Briefly press my: the motorised product starts to move, and stops in the favourite
position (my).
To modify or delete the favourite position (my), see the section entitled

"Additional settings".

3.4. OPERATION WITH A SOMFY SENSOR

Refer to the corresponding guide.
3.5. ADDITIONAL SETTINGS
3.5.1. Modifying the favourite (my) position
Place the motorised product in the desired favourite position (my).
1)
Press my for ≈ 5 seconds until the motorised product moves up and down:
2)
the desired favourite position (my) has been programmed.
3.5.2. Deleting the favourite position (my)
1) Press my: the motorised product starts to move, and stops in the favourite
position (my).
2) Press my again until the motorised product moves: the favourite position (my)
is deleted.
3.5.3 Adding/Deleting Somfy control points and sensors
Refer to the corresponding guide.

3.6. TIPS AND RECOMMENDATIONS FOR USE

3.6.1 Questions about the Oximo 40 WF RTS?
Observations
The motorised product does
not operate.
If the motorised product still does not work, contact a motorisation and home automation professional.
Copyright © 2017-2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Possible causes
The control point battery is low.
1
2
3
1
1
Solutions
Check whether the battery is low and replace it if necessary.
EN
2
2
9