Operation Of Cyclone - Induction Hob - THERMEx Cyclone Manual De Instrucciones

76 THERMEX Cyclone

OPERATION OF CYCLONE - INDUCTION HOB

=
=
=
3
s
3
s
3 sec.
=
Timer
Each cooking zone has its own control panel. Place the pot / pan on a cooking
zone, activate the control and then use the appropriate operation to set the heat,
timer, etc. for the cooking zone.
When the icon "H" appears in the display of a cooking zone, it means that there is
still excess heat in the cooking zone. The cooking zone is therefore still hot, and
therefore do not touch / cover the cooking zone.
Switch the control panel / cooking zone on / off. Pressing the on button activates
the control panel, and heating settings, etc. can now be selected for the current
cooking zone. The cooking zone can always be switched off by pressing the button
again.
Adjust the heating function by using the slider. The heat level can be set from 0-9 +
boost. Boost is a particularly intensive heat level that gives maximum effect for 10
minutes, after which the pre-selected heat level is activated.
OSB: The activation surface for the slider is located below the display, in the square
shown in the illustration.
=
= 94°C
= = 70°C
= 44°C
M 525231082215092021