M 525231082215092021
OPERATION OF CYCLONE
Cyclone consists of two parts; the extractor unit and the hob unit.
OPERATION OF CYCLONE - EXTRACTION
Activating / deactivating extraction - Press the ON / OFF field in to switch on the system. Tap the field again to turn off. To start the suction,
set the "Slider" field on.
The unit has 9 standard speeds and 1 extra speed "Boost" - this function makes it possible to deliver the maximum performance for about 10
minutes, after which the unit returns to the previously set speed.
Hood timer - Use a timer to turn off the hood after a certain period of time.
Delays of 5, 10 or 15 minutes are possible. To activate the timer, press the T button, then use the slider to select the time interval.
Confirm the selected time interval by pressing the T button again.
Slider setting:
3
6
9
To switch off the timer, press and hold the T button.
AUTOMATIC EXTRACTION
The unit is equipped with automatic extraction control. This means that extraction starts automatically when a cooking zone is activated. The
speed of the extraction is increased step by step, in view of the fact that the cooking zone is increased in power.
The automatically set extraction level for the cooker hood can be overridden at any time by pressing the cooker hood control panel. New inputs,
where e.g. increases the extraction speed, does not change the cooking zone settings.
Slider function
ON/OFF
Timer setting:
5 min
10 min
15 min
Operate the slider function either by dragging
your finger over the slider, or by pressing a speci-
fic spot on the slider.
SLIDER FUNCTION
Timer display
Timer
THERMEX CyCLONE
75