Connection Of Double Acting Potential-Free Switch - THERMEx AIRSLIM Instrucciones De Montaje

M 530991001205122017

CONNECTION OF DOUBLE ACTING POTENTIAL-FREE SWITCH

To connect the external system to the double acting potential-free switch, connect the external device to the screw terminal located in the box behind the vent
motor. Always pay particular attention to whether there are special precautions in relation to the external system when it is connected to the potential-free
the instructions of the external system's manufacturer.
switch. Always follow
NOTE: The double acting potential-free switch can support a maximum of 230 Volt ± 10% ~ 50 Hz and 3 amps.
The connection must be performed as follows:
1
Remove the screw terminal from the connec-
tor on the PCB.
2
Insert the wires into the screw terminals of
the external terminal.
NOTE: The connection must be made
according to the circuit diagram.
THERMEX AIRSLIM
3
NO
COM
NC
Attach the screw terminal to the connector on
the PCB.
49