Important Instructions; Consumer Safety Information - Bionaire BCH9212 Manual De Instrucciones

PLEASE READ
ENGLISH
PLEASE READ AND SAVE
THESE IMPORTANT
SAFEGUARDS

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock, and injury to
persons, including the following:
1. Read all instructions before using the
appliance.
2. To avoid fire or shock hazard, plug the
appliance into the appropriate outlet.
3. The heater is hot when in use. To avoid
burns, DO NOT let bare skin touch hot
surfaces. If provided, use handles when
moving this heater. Keep combustible
materials, such as furniture, pillows, bedding,
papers, clothes, and curtains at least 0.9 m
(3') from the front of the heater and keep
them away from the sides and rear.
4. DO NOT run cord under carpeting. DO NOT
cover cord with throw rugs, runners, or the
like. Arrange cord away from traffic area and
where it will not be tripped over.
5. This heater is not intended for use in
bathrooms, laundry areas and similar indoor
locations. NEVER place heater where it may
fall into a bathtub or other water containers.
6. Always unplug the heater when not in use.
7. When unplugging, be sure to pull by the plug
and not the cord.
8. DO NOT insert or allow foreign objects to
enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or
damage the heater.
9. DO NOT operate heater with a damaged
cord or plug, or after the heater malfunctions,
has been dropped or damaged in any
manner. Take appliance to Authorized
Service Center for examination, electrical or
mechanical adjustment, or repair.
10. A heater has hot and arcing or sparking
parts inside. DO NOT use it in areas where
gasoline, paint, or flammable liquids are
used or stored.
11. Use appliance only for intended household
use as described in this manual. Any other
use not recommended by the manufacturer
may cause fire, electric shock, or injury to
persons. The use of attachments not
recommended or sold by the manufacturer
may cause hazards.
12. DO NOT use outdoors.
BCH9212_BCH9221-LA_09MLM1.indd 2-3 BCH9212_BCH9221-LA_09MLM1.indd 2-3
All manuals and user guides at all-guides.com
13. To prevent a possible fire, DO NOT block air
intakes or exhaust in any manner. DO NOT
use on soft surfaces, like a bed, where
openings may become blocked.
14. To disconnect heater, turn controls to the OFF
position, then remove the plug from outlet.
15. Avoid the use of an extension cord because
the extension cord may overheat and cause
a risk of fire. However, if you have to use an
extension cord, The electrical rating of the
extension cord must be equal to or greater
than the electrical rating of the heater.
16. DO NOT attempt to repair or adjust any
electrical or mechanical functions on this
unit. Doing so will void your warranty. The
inside of the unit contains no user
serviceable parts. All servicing should be
performed by qualified personnel only.
17. Discontinue use if plug or outlet is hot. It is
recommended that the outlet be replaced if
plug or outlet is hot to touch.
18. If the heater will not operate, see specific
instructions on Auto Safety Shut-off.
19. WARNING: In order to avoid overheating, do
not cover the heater ( ).
20. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
21. Close supervision is necessary when any
appliance is used by or near children, or
incapacitated individuals.
PLEASE SAVE THESE
INSTRUCTIONS

CONSUMER SAFETY INFORMATION

(For 120 NEMA 1-15P plugs only) This
appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. DO NOT
MODIFY THE PLUG IN ANY WAY
2
ASSEMBLY INSTRUCTIONS
Unpack your heater from the box, being careful
to remove all parts from plastic bags and
remaining packaging. Please save the carton for
off-season storage.
This model is packed with separate base and
pedestal in the box. Carefully remove all parts
from plastic bags. To prevent scratches, place all
parts onto a cloth before assembly. Follow the
below instructions for Pedestal/Base assembly:
Pedestal Assembly
NOTE: If no pedestal is included in this model,
move to Base Assembly.
Step 1: Run the power cord through the center
of the assembled pedestal. Snap
pedestal into the bottom of the heater
housing. Refer to Figure 1 & 2.
Base Assembly
Step 1: If the base is in two halves, snap them
together by sliding slots of one base
half into slots of second base half.
Refer to Figure 3.
Step 2: Run the power cord through the center
of the assembled base. To assemble
the base to the unit (either one or two-
piece base) first make sure the side
marked "Rear" is facing the back of
the heater. Line up holes of the base
with holes on bottom of pedestal (or
heater housing if no pedestal is
included), and secure with 4 provided
screws. Refer to Figure 4.
Step 3: Lace the power cord through the cord
minders on the underside of the base.
Refer to Figure 5.
Step 4: Turn the heater right side up on a flat
level surface prior to beginning operation.
Remote Control
Your heater comes with a remote control, unpack
the remote control from box. This includes one
lithium battery, CR2025/3V. Please note this
remote control will not work through walls.
Remove battery before discarding the remote.
NOTE: REMOVE THE PROTECTIVE COVER
FROM THE BATTERY PRIOR TO BEGINNING
OPERATION.
Battery Replacement
1. Locate the battery cover on the back of the
remote control handset. Slide the battery
cover out with your thumb.
2. Place battery into battery compartment.
3. Slide battery cover closed.
4. For your convenience, a remote control
holder is integrated into the back of the
heater housing.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
3
7/21/09 4:35:42 PM 7/21/09 4:35:42 PM