Looking Inside - KENMORE ELITE 253 Serie Guía Para Su Uso Y Cuidado

CAUTION CAUTION CAUTION CAUTION CAUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
1 Remove shelf by pulling forward to stop position.
2 Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this
procedure.
Sliding Glass Shelf
To adjust cantilever shelves:
N O T E N O T E N O T E
N O T E N O T E
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves are available in either glass
or wire.
1 Lift front edge up.
2 Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into
the wall bracket. Lower the shelf into the desired slots and lock
into position.
SpillProof TM
glass shelves (some models) catch and hold
accidental spills. In some models, the SpillProof
slide out for easy access to food and for fast cleaning. The
shelves slide out independently of the cantilever brackets. Just
pull the front of the shelf forward. The shelf can be extended as
far as the stopper will allow but it is not removable from the
cantilever bracket.
Full Width Cantilever
Glass Shelf
All manuals and user guides at all-guides.com

LOOKING INSIDE

DOOR STORAGE
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
Some models have door
racks or bins that can
accommodate gallon-sized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
storage capacity.
The dairy compartment,
which is warmer than the
general food storage section,
is intended for short term
storage of cheese, spreads,
or butter.
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to
suit individual needs.
To move door bins
1.
2.
3.
Sliding Wire Shelf
4.
TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
TM shelves
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tall Bottle
Retainer works best with a Bin Snugger.
Cantilever Glass Shelf,
Fixed and Sliding
11
Lift bin straight up.
Remove bin.
Place bin in
desired position.
Lower bin onto
supports until
locked in place.
Adjustable
Door Bin
Tall Bottle Retainer (left) and Bin Snugger (right)
Door Rack