To Clean The Air Filter; To Lubricate The Gear Housing; To Apply Oil To The Foam Air Filter; To Clean And Lubricate The Blades - McCulloch SUPERLITE 4528 Manual Del Usuario

Ocultar thumbs Ver también para SUPERLITE 4528:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, refer to
on page 14 .
Replace the spark plug if it is necessary.

To clean the air filter

Clean the air filter regularly from dirt and dust. This
prevents carburetor malfunctions, starting problems,
loss of engine power, wear to engine parts and more
fuel consumption than usual.
1. Remove the air filter cover (A).
A
B
2. Remove the air filter (B) from the filter frame.
3. Clean the air filter with warm soap water.
CAUTION:
used for a long time cannot be fully
cleaned. Replace the air filter regularly
and always replace a defective air filter.
4. Make sure that the air filter is dry.
5. Apply oil to the air filter. Refer to
foam air filter on page 12 .
6. Clean the inner surface of the air filter cover. Use
compressed air or a brush.

To apply oil to the foam air filter

CAUTION:
special air filter oil. Do not use other types
of oil.
WARNING:
The air filter oil can cause skin irritation.
1. Put the foam air filter in a plastic bag.
12
Technical data
An air filter that is
To apply oil to the
Always use McCULLOCH
Put on protective gloves.
2. Put the oil in the plastic bag.
3. Rub the plastic bag to supply the oil equally across
the foam air filter.
4. Push the unwanted oil out of the foam air filter while
in the plastic bag.

To lubricate the gear housing

Use McCULLOCH special grease. Speak to
your servicing dealer for more information about
recommended grease.
Add the grease through the lubricant filler cap on the
gear housing.
CAUTION:
fully.

To clean and lubricate the blades

1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note:
Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.

To examine the blades

1. Remove the lubricant filler cap on the gear housing.
Do not fill the gear housing
1255 - 003 - 10.03.2022
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ergolite 6028

Tabla de contenido