Kärcher BR 55/60 W Ep Manual De Instrucciones página 23

Routine cleaning and ba-
sic cleaning of industrial
floors
Routine cleaning and ba-
sic cleaning of fine stone-
ware tiles
Routine cleaning of tiles in
sanitary areas
Cleaning and disinfection
in sanitary areas
Removal of coating from
all alkali-resistant floors
(e.g. PVC)
Removal of coating from li-
noleum floors
Add detergent. Follow dosing instruc-
tions for detergent.
Settings
Setting the water quantity
Adjust the water quantity using the reg-
ulating button according to the dirt on
the floor covering.
Note
Carry out the initial cleaning attempts with
little quantities of water. Increase water
quantity step-by-step until the desired
cleaning result is achieved.
Lower the vacuum bar
Turn the lever downwards; the vacuum
bar is lowered and the suction turbine is
switched on.
22
English
RM 69 ASF
RM 753
RM 751
RM 732
RM 752
Note
For cleaning tiled floors, set the straight
vacuum bar in such a way that cleaning is
RM 754
done at right angles to the joints.
The inclined position and the inclination of
the vacuum bar can be adjusted to achieve
better suction results (see "Setting the Vac-
uum Bar").
Switching on the cleaning head
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Warning!
Press the pedal downwards; move it to
the left and release it upward. The
cleaning head is lowered and the brush
motor starts automatically.
Adjust brush contact pressure at the le-
ver.