Range Rated - Beretta EXCLUSIVE 25C Manual Para El Instalador Y El Usuario

EXCLUSIVE
When the checks are completed:
- set the boiler to HOT WATER ONLY or HEATING AND HOT WATER
mode depending on the season
- regulate the heat request temperature values according to the customer's
needs.
IMPORTANT
The combustion analysis function is active for a time limit of 15 minutes;
the burner shuts down if an outlet temperature of 95° C is reached. It will
ignite again when the temperature falls below 75° C.
b
In case of a low temperature system we recommend carrying out the
efficiency test by taking hot water setting the boiler STATE to HOT
WATER ONLY, opening the hot water tap to full capacity and setting
the temperature of the domestic hot water to the maximum.
b
All controls must be carried out exclusively by the Technical
Assistance Centre.

5.14 Range rated

This boiler can be adapted to the system thermal requirements as it is
possible to set the maximum flow rate for the boiler operation in heating
mode:
- power on the boiler
- access the parameters as explained in paragraph "4.1 Access to the
technical parameters"
- select RANGE RATED and confirm it
INSTALLATION
WEATHER COMPENSATION THERMOREGULATION
RANGE RATED
CALIBRATION
INSTALLER
INSTALLER
- set the desired heating maximum value (rpm) with the "up" and "down"
keys, confirming the selection
RANGE RATED
5100
- once the desired power is set (maximum heating) note the value onto the
supplied self-adhesive label. For further checks and adjustments refer to
the set value.
b
The calibration does not cause the boiler ignition.
The boiler is supplied with the settings indicated in the multigas table.
It is nevertheless possible, according to the system requirements or the
regional regulations on the combustion gas emission limits, to set that value
by referring to the graphs below.
Curva portata termica - giri ventilatore
Caldaia Vision+ 24C PLUS
HTG curve (Qnheating)
8400
8000
7600
7200
6800
6400
6000
5600
5200
4800
4400
4000
3600
3200
2800
2400
2000
1600
1200
800
2 4 6 8 10 12
22
TECHNICAL
TECHNICAL
INSTALLATION
PARAMETERS PARAMETERS
RANGE RATED
CALIBRATION
RANGE RATED
RPM
EXCLUSIVE 25C
14 16 18 20 22 24
Heat output (kW) Portata termica (kW)
8400
8000
7600
7200
6800
6400
6000
5600
5200
4800
4400
4000
3600
3200
2800
2400
2000
1600
1200
800
2 4
8400
8000
7600
7200
6800
6400
6000
5600
5200
4800
4400
4000
3600
3200
2800
2400
2000
1600
1200
4 6
8800
8400
8000
7600
7200
6800
6400
6000
5600
5200
4800
4400
4000
3600
3200
2800
2400
2000
1600
1200
4 6 8
5.15 Lights and faults
If any faults should occur, a screen will appear on the display indicating
the relative error code and a brief alphanumeric description of the same.
Pressing the "back" button it is possible to return to the main screen,
where a fault is signalled by this flashing icon
The user can return to the fault description screen by using the "up" and
"down" keys and then pressing the "ok" key.
The faults description screen is automatically displayed once the display
illumination time has elapsed without any button being pressed.
Press the "up" and "down" keys to display the descriptions of any other
26 28 30
faults that may be present.
EXCLUSIVE 30C
Curva portata termica - giri ventilatore
Caldaia Vision+ 28C PLUS
HTG curve (Qnheating)
6 8 10 12 14 16 18
Portata termica (kW)
Heat output (kW)
EXCLUSIVE 35C
HTG curve (Qnheating)
8 10 12 14 16 18 20
Heat output (kW)
EXCLUSIVE 42C
Curva portata termica - giri ventilatore
Caldaia Exclusive 42C
HTG curve (Qnheating)
10 12 14 16 18 20 22 24 26 28
Heat output (kW)
Portata termica (kW)
FRI
FRI
PLANT
PLANT
18/05/2013
1.3 bar
MENU
MENU
42
°C
INFO SET
INFO SET
HOT WATER TEMPERATURE
HOT WATER TEMPERATURE
20 22 24 26 28 30
22 24 26 28 30 32 34
30 32 34 36 38 40 42 44 46
.
12:17
STATE
STATE