Before Cooking; Auto Reminder; Clock Setting - Jocel JME011473 Manual De Instrucciones

1.

BEFORE COOKING

The LCD flashes 3 times when plugged in power supply. Then it flashes "1:00", flashing 1
second/times, " "light (after self-checking buzzer sing a loud).
2.
On the standby status, press " "button 3 seconds to enter the Clock Setting, then slide up or down to
adjust "Time/Weight." input hours, then press "Clock/Defrost/Auto Cooking" botton again to enter the
minutes setting with the same operation ,at last press "Clock/Defrost/Auto Cooking" botton to confirm (or
delay after 60 seconds automatically confirm have just set a time), the Clock into the running state, (repeat
the operation Clock can be modified or set).
3. PAUSE/CANCEL
At the initial or input stage: press once to cancel input programs and resume initial stage.
During cooking: press once to stop oven operation, press twice to cancel cooking programs.

4. AUTO REMINDER

When your preset cooking procedure have finished, the LCD display will show End and three beeps sound
will be heard to prompt you to take out food. If you do not press Pause/Cancel button once or open the
door, the beep will be sounded at an interval of 3 minutes.
5. INSTANT COOKING
On the standby status, press Start button, the oven will start express cook with high power; the default
cooking time is one minute. You can increase or decrease cooking time by sliding up or down to adjust the
Time/Weight .

6. CLOCK SETTING

Clock button make it available for you to input current or preset time when ":" flashes onto LCD display after
plugged in or try to skip it over to continue if unnecessary.
51