Setting Required Values - Kaiser+Kraft 614 627 Manual De Uso Y Mantenimiento

8.5

Setting required values

Required values sets up in following way:
Operating
Press and hold button 0 with switched scale
Let go button 0
Press 4 x button
Press buton 
Enter bottom required value. (L means low). Number, which must be changed, blink.
Please pay attention on decimal place.
Example: 212,0 kg
Enter the values in above way.
After entering data Press button 
Enter higher required value (H means high). Example: 300,0 kg
Enter the values in above way
Press button 
Set alarm signal and display indications/ (option: relay output):
1. Number: Setting relation of stableness
0: Alarm signal, according to number 2. and relations on display/ output, when scale is
stable.
1: Alarm signal, according to number 2, when the scale is stable.
relations on display/ output, independent of stableness.
2: Alarm signal, according to number 2 . a n d r e l a t i o n s o n d i s p l a y /
w h e n s c a l e i s s t a b l e .
2. Number: Setting extend alarm signal
0: Without alarm signal
1: Alarm signal, when the load within correct extend.
2: Alarm signal, when the load is within extend Low/ High.
Example: Alarm signal within set up range, independently if the scale is stable or
unstable. Value, which should be set: 2 1 b
Insert the value in above way.
Press button .
Press 2 x button
Press button .
8.5 Setting required values is accomplished
Increasing number
Move arrow pointer one space on the right
Returning At the begging of process inputting data
.
GB
Values
02001
F0
F4
0 - - - -. L
0 - - - -. L
00212.0
0 - - - -. H
0 - - - -. H
00300.0
0 - b
o u t p u t ,
2 1 b
F4
F6
0,0
GB - 15