Connecting Your Vcr Or Laser Disc Player - NEC HT1100 Manual Del Usuario

Connecting Your VCR or Laser Disc Player

VIDEO AUDIO IN
or
S-VIDEO AUDIO IN
Audio cable
(supplied)
VCR/ Laser disc player
Use the supplied composite video cable to connect your VCR or laser disc player to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR or laser disc player.
2. Connect one end of the composite video cable to the video output connector on the back of your VCR or laser disc player, connect the other end
to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio
equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo
sound.
3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output requirements.
All manuals and user guides at all-guides.com
VIDEO IN S-VIDEO IN
VIDEO VIDEO S-VIDEO S-VIDEO COMPONENT
PC CONTROL VIDEO IN S-VIDEO IN
Y Cb/Pb
Composite video
cable (supplied)
AUDIO OUT
R L
VIDEO OUT
Audio cable (not supplied)
E-14
RGB/DVI RGB/DVI AUDIO IN AUDIO IN SC TRIGGER
DVI-D IN
Cr/Pr COMPUTER IN
S-video cable (supplied)
Audio equipment
AUDIO IN
L R
S-VIDEO OUT