Operation - cecotec bolero DRESSCODE 7200 Manual De Instrucciones

Connection finished.
Connection between screw tap and inlet hose. Fig. 9.
Tap with threads and inlet hose.
Special tap for washing machine.
Connect the other end of inlet hose to the inlet valve at the backside of product and fasten the
pipe tightly clockwise. Fig. 10.
Drain hose
Note: Do not kink or protract the drain hose.
Position the drain hose properly, at 60-90 cm from the floor.
There are two ways to place the end of the drain hose:
In a drainpipe. It is recommended to use a vertical tube.
In a sink's drainpipe, over the trap.
Fig. 11.
If the machine has drain hose support, it can also be installed on a sink or a tank, like the
following. Fig. 12.
Warning: When installing drain hose, fix it properly with a rope. If drain hose is too long, do not
force it into washing machine as it will cause abnormal noises.

4. OPERATION

Note:
Please make sure the appliance is properly installed before operating it.
Run one whole cycle while the appliance is empty before using it for the first time.
QuickStart
Before washing
Plug the appliance to a power supply.
Open the tap.
Load.
Close the door.
Add detergent.
Fig. 13.
Note: Detergent must be added in "case I" only after selecting pre-washing for machines with
this function.
02316_02318_02321_02323_Bolero DressCode 7200_Steel_8200_Steel_YV_02210311.indd 53 02316_02318_02321_02323_Bolero DressCode 7200_Steel_8200_Steel_YV_02210311.indd 53
BOLERO DRESSCODE 7200 / 7200 STEEL / 8200 / 8200 STEEL
ENGLISH
53
11/3/21 17:06 11/3/21 17:06