Troubleshooting - cecotec bolero DRESSCODE 7200 Manual De Instrucciones

ENGLISH
Warning:
Make sure that the valve cap and emergency drain hose are reinstalled properly, cap plates
should be inserted aligned to the hole plates.
*Some machines don have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate the lower cover cap directly for water to run into the basin.
When the appliance is in use and depending on the programme selected there can be hot
water in the pump. Never remove the pump cover during a wash cycle, always wait until the
appliance has finished the cycle and is empty.
When replacing the cover, ensure it is securely re-tightened.

6. TROUBLESHOOTING

Problem
The washing machine does
not start up
The door does not open
Water leakage
Detergent residues in the
box
Indicator or display does
not light
Abnormal noise
Errors
Error
E30
62
02316_02318_02321_02323_Bolero DressCode 7200_Steel_8200_Steel_YV_02210311.indd 62 02316_02318_02321_02323_Bolero DressCode 7200_Steel_8200_Steel_YV_02210311.indd 62
Cause
The door is not closed
properly
The safety lock system is
activated
Bad connection between
pipes and water supply hose
or drainpipe.
Detergent is dampened or
agglomerated
The power PC board is
disconnected, or harness
has connection problem
Cause
Door is not closed properly
Solution
Restart after the door is
closed.
Check if there are clothes
stuck.
Unplug it and restart the
product.
Check and fasten water pipes
and hose.
Clean up outlet hose.
Clean and wipe the detergent
box
Check if the power is shut
down and the power plug is
connected correctly.
Check if the fixing bolts have
been removed.
Make sure the appliance is
installed on a solid, level
floor.
solution
Restart after the door is
closed.
Check if there are clothes
stuck.
11/3/21 17:06 11/3/21 17:06