Disposal - Lavor GV EGON VAC Manual Del Usuario

TROUBLE
- The suction power is too low
- The suction motor is working
but there is no suction
- The handgrip buttons do not
hold the handle safely
- Malodorous smell from flex
tube or attachment
As the owner of electrical or electronic equipment, the law (in accordance with the EU
Directive 2012/19/EU on waste from electrical and electronic equipment and the national
laws of the EU Member States that have implemented this Directive) prohibits you from
disposing of this product or its electrical / electronic accessories as municipal solid waste and
obliges you to make use of the appropriate waste collection facilities. The product can be disposed
of by returning it to the distributor when a new, equivalent product is purchased. Disposing of the
product in the environment can cause great harm to the environment itself and human health. The
symbol in the figure indicates the urban waste containers and it is strictly prohibited to dispose of
the equipment in these containers. Non-compliance with the regulations stipulated in the
2012/19/EU Directive and the decrees implemented in the various EU Member States is
administratively punishable.
EN
CAUSE
- One of the filters is clogged
- Wrong filter assembly
- Air bypass
- The float has come in operation - Empty the tank
- Wrong assembly or position of
filter assembly (O)
- Wet dirt remnants in flex tube
or attachment

16 DISPOSAL

SOLUTION
- Check and clean solids filter
(R), microfibre filter (P) or
sponge filter (Q), air filter (X)
and carbon filter (Y)
- Make sure that the filter
assembly (O) is properly
assembled with lower filter
cover (S) and solids filter (R)
- Make sure that the tank (M),
the filter assembly (O), the flex
tube (1) and the quick connector
(27) are positioned correctly.
- Check the assembly, make sure
that microfibre or sponge filter
are properly inserted
- Clean the parts according to
"Maintenance" in
instructions
use
53