Reinserting The Brew Group; Cleaning And Maintenance - Philips 4300 Serie Manual Del Usuario

Reinserting the brew group

Before you slide the brew group back into the machine, make sure it is in the correct position.
1 Check if the brew group is in the correct position. The arrow on the yellow cylinder on the side of the
brew group has to be aligned with the black arrow and N (Fig. 30).
-
If they are not aligned, push down the lever until it is in contact with the base of the brew group (Fig.
31).
2 Slide the brew group back into the machine along the guiding rails on the sides (Fig. 32) until it locks into
position with a click (Fig. 33). Do not press the PUSH button.
3 Close the service door and place back the water tank.

Cleaning and maintenance

Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting coffee
for a long time with a steady coffee flow.
Consult the table below for a detailed description on when and how to clean all detachable parts of the
machine. You can find more detailed information and video instructions on www.philips.com/coffee-care.
See figure B for an overview of which parts can be cleaned in the dishwasher.
Detachable parts
Brew group
Classic milk frother
Pre-ground coffee
compartment
Coffee grounds
container
When to clean
Weekly
Monthly
After every use
Check the pre-ground coffee
compartment weekly to see if it is
clogged.
Empty the coffee grounds
container when prompted by the
machine. Clean it weekly.
How to clean
Remove the brew group from the machine (see
'Removing and inserting the brew group').
Rinse it under the tap (see 'Cleaning the brew
group under the tap').
Clean the brew group with the Philips coffee
oil remover tablet (see 'Cleaning the brew
group with the coffee oil remover tablets').
First clean the milk frother while it is attached
to the machine by using the 'Quick milk clean'
program (see 'Quick cleaning the classic milk
frother'). Then remove the milk frother from
the machine and disassemble it. Clean all parts
under the tap or in the dishwasher. Let the
parts air dry before reassembling them.
Unplug the machine and remove the brew
group. Open the lid of the pre-ground coffee
compartment and insert the spoon handle into
it. Move the handle up and down until the
clogged ground coffee falls down (Fig. 34). Go
to www.philips.com/coffee-care for detailed
video instructions.
Remove the coffee grounds container while
the machine is switched on. Rinse it under the
tap with some washing-up liquid or clean it in
the dishwasher. The front panel of the coffee
grounds container (Fig. A15) is not
dishwasher-safe.
English
15