Frothing Or Heating Up Milk With Classic Milk Frother; Extra Shot (Extrashot) (Specific Types Only) - Philips 4300 Serie Manual Del Usuario

1 To assemble LatteGo, first insert the top of the milk container under the hook at the top of the frame
(Fig. 8). Then press home the bottom part of the milk container. You hear a click when it locks into place
(Fig. 9).
Note: Make sure that the milk container and the frame are clean before you connect them.
2 Slightly tilt LatteGo and put it on the hot water spout (Fig. 10). Then press it home until it locks into place
(Fig. 11).
3 Fill LatteGo with milk (Fig. 12). Do not fill the milk container beyond the maximum indication.
If you have personalized the milk quantity, you may need to fill the milk container with more or less
milk than indicated for this drink on LatteGo.
Always use milk coming directly from the fridge for optimal results.
4 Place a cup on the drip tray.
5 Tap the milk-based drink icon of your choice or tap the 'More Drinks' icon (specific types only) to select a
different drink (see 'Personalizing drinks')
-
You can now adjust the drink to your own preference.
6 Press the start/stop
-
When you brew cappuccino, flat white or latte macchiato, the machine first dispenses milk and then
coffee. When you brew caffè latte or café au lait, the machine first dispenses coffee and then milk.
-
To stop dispensing milk before the machine has dispensed the preset amount, press the start/stop
button.
7 To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and hold
the start/stop button.

Frothing or heating up milk with classic milk frother

Always use milk coming directly from the fridge for the best foam quality.
1 Tilt the black silicone handle on the machine to the left and slide the milk frother onto it (Fig. 13).
2 Fill a milk jug with with approx. 100 ml milk for cappuccino and approx. 150 ml milk for latte macchiato.
3 Insert the milk frother approx. 1 cm into the milk.
4 Tap the steam icon (Fig. 14).
5 Turn the knob on the classic milk frother to the milk frothing icon (Fig. 15) if you want to froth milk. Turn
the knob on the classic milk frother to the flat milk icon (Fig. 16) if you want heat up milk.
6 Make sure that the icon on the knob of the classic milk frother is aligned with the black arrow.
7 Press the start/stop
-
The machine starts heating up, steam is forced into the milk and the milk is either frothed or heated.
Small jets of hot water can be dispensed by the classic milk frother.
8 When the milk in the milk jug has reached the required foam volume or heat, press the start/stop
button again to stop frothing/heating milk.
Never steam milk longer than 90 seconds. The steaming automatically stops after 90 seconds.
In order to get the best milk froth quality, you do not have to move the milk jug during milk frothing.

Extra shot (ExtraShot) (specific types only)

Your machine offers you the possibility to add an extra shot of Ristretto to your coffee and milk drinks, for
example if you want to have a stronger coffee.
1 Place a cup under the spout
button.
button to start (Fig. 17).
English
11