Figure 3
PREPARATION:
Gather the following prior to brewing
•
Fine espresso ground coffee
•
Tap water (or, preferably your favorite bottled water)
•
Preffered Milk (Whole milk is recommended for best frothing results)
•
Teaspoon and cup
1. The first step in making cappuccino is to make espresso. Therefore, fill the water
reservoir with cold water. Never use warm or hot water to fill the water reservoir.
2. Follow the steps in the "BREWING ESPRESSO" section.
3. Fill the milk reservoir with Milk, using as guide the "MAX" marks to achieve best
performance.
4. Make sure cup is below the adjustable frothed milk dispensing tube, missing this step
might lead to spill the milk in the counter.
6. Turn the Brew/Steam Switch and make sure it is on the Steam "
the temperature ready light "
to the Steam "
" position.This will initiate the frothing process and fothed milk will
begin to flow out of the adjustable frothed milk dispensive tube in just seconds.
7. You are now ready to make cappuccino. Pour the espresso into a cup, which has the
capacity of at least 150 mL (5 ounces). Then add the steamed milk to the espresso.
8. When you have made the desired ammount of cappuccinos, unplug the power cord
and allow the machine to cool.
Type of drink
Coffee volume (ml) Milk volume (ml)
Single espresso
Double espresso
Americano
Cappuccino
Latte
RECIPES
CLEANING YOUR ESPRESSO & CAPPUCCINO MAKER
IMPORTANT CLEANING TIP: When you are finished steaming milk follow the
instructions below to flush out any residual milk from the frother body. It is important to
properly clean your frother body after each use to ensure the best perfomance.
Figure 4
" turns on, rotate the control knob counterclockwise.
30
NA
60
NA
60
NA
60
100-130
60
150-180
En glish -10
Figure 5
" position. When
Recommended time (seconds)
8
15
8-12
espresso: 15 | milk: 30-40
espresso: 15 | milk: 90-115