Oster BVSTEM5501B Manual De Instrucciones página 23

PLACING THE FILTER ON THE PORTA-FILTER
1. Insert the filter into the porta-filter, making sure to align the
filter dimple to the porta-filter notch (see figure 4).
2. Turn the filter to the left or right to lock it in place (see figure 5).
NOTE: To remove the filter for cleaning, turn the filter to the left or
right to align the filter dimple to the porta-filter notch, proceed to
remove.
CAUTION: Make sure the filter is cool before attempting to
remove it from the porta-filter.
FILLING WITH COFFEE
Place selected filter on porta-filter as follows:
FOR GROUND COFFEE:
a. Fill the filter with fresh, fine ground espresso coffee (do not
overfill).
b. Tamp and compress firmly and evenly ground coffee.
c. Clean any excess coffee from the rim to ensure proper fit under brew head.
Helpful tip: When filling the filter with coffee, make sure that coffee is almost to the top of the
filter, and then tamp VERY FIRMLY.
a.
PLACING THE PORTA-FILTER
a. Position porta-filter underneath the brew head, attach porta-filter by first moving
retainer clip back.
b. Position handle so that the handle lines up with the open lock icon "
and fits into the groove.
c. Then, slowly turn it to the right until the retention clip is aligned with the closed lock
symbol " " on the unit.
a.
b.
b.
Eng lish -7
Figure 4
Figure 5
c.
" on the unit
c.