Computer Input; Computer System Selection - Christie LWU505 Manual Del Usuario

Computer Input

Automatic Multi-Scan System
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC
adjustment. If a computer is selected as a signal source, this projector automatically detects the signal
format and tunes to project a proper image without any additional settings. (Signal formats provided in this
projector are shown on pages 82-83)
One of the following messages may appear when:
When the projector cannot recognize the
Auto
connected signal conforming to the provided
PC Systems, Auto is displayed on the System
Menu box and the Auto PC adjustment function
works to display proper images. If the image is
not projected properly, a manual adjustment is
required (pp. 38-39).
There is no signal input from the computer.
- - - -
Check the connection between your computer
and the projector. (See "Troubleshooting" on
pp. 73-75.)
The preset system is manually adjusted in the
Mode 1
PC adjust Menu. The adjusted data can be
stored in Mode 1-10 (pp.38-39).
PC Systems provided in this projector is
SVGA 1
chosen. The projector chooses a proper system
provided in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
Press the MENU button to display the On-Screen
1
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select System and
2
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired
3
system and then press the SELECT button.
36

Computer System Selection

PC System Menu
The PC System Menu
Selected system is
displayed.
PC System Menu
Customized Mode (1-10)
set in the PC adjust Menu
(pp.38-39).
Systems in this dialog
box can be selected.
020-000374-0
LWU505 User Manual