Navigating Between Menus; Navigating Within A Menu; Using The Alphanumeric Keypad; Alphanumeric Input - Mettler Toledo SevenGo Duo pro SG68 Instrucciones De Manejo

Delete

4.5 Navigating between menus

The meter display consists of a measurement frame, softkeys, areas for status icons and underlying menu
areas.
To access the menu areas and to navigate between them, use various softkeys (see "Using the softkeys").
1 Press Menu.
The Setup menu appears and Sample ID is highlighted.
2 Press
3 Press
4 Press
5 Press MODE/EXIT to return to the measurement screen.

4.6 Navigating within a menu

This example is based on the Setup menu, but the procedure applies to the other menus as well.
Press Menu.
The Setup menu appears and Sample ID is highlighted.
Press
Press Select to move deeper in the menu for the chosen operation.
Continue navigating with
Press MODE/EXIT to go back to the previous menu.
— or —
Press READ to return to the measurement screen directly.

4.7 Using the alphanumeric keypad

4.7.1 Alphanumeric input

The meter has a screen keypad for entering IDs, SNs and PINs. Both numbers and letters are allowed for these
entries.
Note
When entering a PIN, each character entered will be displayed as ( * ).
1 Press
downwards.
2 Press READ to confirm the entry.
The line where the position of alphanumeric character is being entered blinks.
3 To end and confirm entry, use softkeys to highlight screen key OK, and press READ to save the ID.
— or —
12 Operating the pH/ORP/Ion/DO meter SG68​ ​
Delete selected data
to highlight the Setup tab.
to highlight the pH/Ion tab.
to highlight the DO tab.
as often as needed to navigate to a menu item.
, or Select until the final destination is reached within the menu.
to move left to highlight number or letter, use
Trans Transfer selected data
to move right, and to move
SevenGo Duo pro™