Cleaning And Maintenance - cecotec FORCECLIMA 9050 Manual De Instrucciones

Automatic switching off while the appliance is in operating
• The appliance is switched on.
• Press the
to set the desired time interval (1 - 24 hours). The clock icon appears in the display (4).
• Press the
control, several times if necessary, until the desired switching time is set. Once the
time has been set, the Display (4) switches back to the temperature display after a few
moments.o view a set switching time, briefly press the TIMER button (1) on the appliance
or the button (H) on the remote control. The switching time will be displayed. The
Display (4) switches back to the temperature display after a few moments.
• The appliance switches off automatically after the preset time has elapsed.
h) Auto shutdown when the condensate tank is full
This product has an automatic evaporation system. This re-uses the condensate for air
conditioning to save energy and increase the cooling efficiency.
• If the condensate tank is full, the WATER FULL lamp is on and the appliance switches to
standby after 8 seconds. An alarm sounds, the compressor and all operating keys will be
locked. This status lasts until the condensate tank is emptied. Please refer to chapter 15.
Maintenance a) Emptying the condensate tank.
• Unplug the plug in mains socket after the auto shutdown to reset the appliance. Insert the
mains cable with plug back into the socket again. Press the POWER button (8) to switch
the appliance on again.

6. CLEANING AND MAINTENANCE

CLEANING
a) General cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or stop the product from
operating properly.
• Always disconnect the product from
the power supply before cleaning it.
• Use a damp, lint-free cloth to clean the
product.
• Never hold the appliance under
running water or immerse it in water or
any other liquid during cleaning. Water
must not get inside the appliance.
TIMER button (1) on the appliance or the
TIMER button (1) on the appliance or the
button (H) on the remote control
button (H) on the remote
FORCECLIMA 9050
ENGLISH
33