Gude GSS 400 Instrucciones De Uso Originales página 12

Non-skid shoes are recommended. If your hair is long,
wear a hairnet.
•
Mind a stable poise and good footing when working with
the unit.
•
Always leave the existing protection equipment in place
and make sure that they work perfectly. The operation
without the protection equipment is not allowed.
• Make regular checks to see that all the screwed joint are
fitted firmly.
•
Make sure that the power supply cable is not taken within
the reach of rotating parts.
•
Do not leave the unit unattended if it is running. Any time
you leave the unit, switch it off. Do no leave any
adjustment wrenches stuck in the unit.
•
Before switching on, make sure that all the wrenches and
adjusting tools are removed.
•
Any longer products should be supported.
• Avoid any contact with grinding aids and materials.
•
Be careful to avoid any hit on the saw disc. No
warranty may be granted against the diamond disc
damage.
The unit is allowed for use in RCD mains (stray
current protection).
Residual Hazards and Protective Action
1. Mechanical Residual Hazards:
• Catching, winding:
Loose-fitting clothes, jewels or long hair may be caught
by moving parts.
 Wear tight-fitting garments and no jewels. Protect
your hair with a hairnet.
• Friction, abrasion:
A contact with the rotating grinding wheel may result in
serious injuries.
 Always prevent any contact of your hands with the
wheel. Wear protective gloves.
2. Electrical Residual Hazards:
• Direct electrical contact:
Defective cable or plug may cause an electrical shock
 Have the defective cable/plug exchanged by a
professional. Use the unit only if connected via a
faulty current switch (RCD).
• Indirect electrical contact
Wounds caused by conductive parts on open
electrical or defective structural parts
 Always unplug before any maintenance. Operate
only with RCD switch installed.
3. Noise Hazards:
• Impaired Hearing
Prolonged work with the saw may result in hearing
impairment
 Always wear ear protectors
4. Materials and Other Substances Hazards:
• Contact, aspiration:
Lungs may be affected by great amount of dust being
formed
 Always wear breathing mask when working with
the unit.
5. Human Factors Neglect:
• Negligent use of personal protection equipment:
Operating the unit without adequate PPE may cause
severe external/internal injuries
 Always wear prescribed protective clothing and
work considerately.
• Inadequate local lighting:
Insufficient light is a heavy safety risk.
 Provide for sufficient lighting
6. Other Hazards:
• Thrown away articles and splashes
The band or mechanical particles may wound your
eyes in the course of grinding job.
 Always wear protection goggles.
Marking
Meaning of Symbols
Symbols shown below are used throughout this manual and/or
on the unit:
Product Safety:
Product corresponds to
applicable EU standards
Bans:
General ban In combination
with another pictogram)
No pulling the cable!
Warning:
Warning/Caution
Keep safe distance!
Commands:
Please read carefully the
Operating Instructions.
Wear protective gloves!
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Any defective and/or
disposed electric or
electronic devices must be
delivered to respective
collection centres.
12
This product has protective
insulation.
Do not use the unit in rain!
Do not touch rotating parts!
Warning against dangerous
voltage
Wear ear protectors and
protective glasses!
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Interseroh-Recycling system
with serial number