Work Instructions And Safety Precautions; General Information; Mechanical Components; Electrical System - Festo 8131016 Instrucciones De Utilizacion

Robotino 4 Charging Station – Operating instructions

5 Work instructions and safety precautions

5.1 General information

5.2 Mechanical components

5.3 Electrical system

12
•
Trainees must be supervised by an instructor at all times when working with the
components and systems.
•
Observe the specifications included in the technical data for the individual
components, and in particular all the safety instructions!
• Switch off the power supply!
– Switch off both the operating power and the control power before commencing
work on the circuit.
– Never reach into the setup unless it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
•
Risk of injury during troubleshooting!
– Use a tool such as a screwdriver when actuating mechanical limit switches.
•
Follow the instructions regarding positioning of the components.
Risk of explosion and fire!
Make sure that the rechargeable batteries are never short-circuited.
CAUTION
WARNING
CAUTION
WARNING
© Festo Didactic 8134684