General Prerequisites For Operating The Devices - Festo 8131016 Instrucciones De Utilizacion

Robotino 4 Charging Station – Operating instructions

1 General prerequisites for operating the devices

General requirements for safe operation of the devices:
•
National regulations for operating electrical systems and equipment must be observed in industrial
facilities.
•
The laboratory or classroom must be overseen by a supervisor.
– A supervisor is a qualified electrician or a person who has been trained in electrical engineering,
knows the respective safety requirements and safety regulations, and whose training has been
documented accordingly.
The laboratory or classroom must be equipped with the following devices:
•
An emergency-off device must be provided.
– At least one emergency-off device must be located within the laboratory or classroom, and one
outside of it.
•
The laboratory or classroom must be secured using one or more of the following measures so that the
operating voltage and compressed air supply cannot be activated by unauthorized persons:
– A key switch
– Lockable shut off valves
•
The laboratory or classroom must be protected by residual current devices (RCDs).
– Electrical devices (e.g. power supplies, air compressors and hydraulic units) may only be operated
in training rooms which are equipped with residual current devices.
– Type B residual current circuit breakers with a residual current of ≤ 30 mA must be used.
• The laboratory or classroom must be protected by overcurrent protection devices.
– Fuses or circuit breakers
•
Damaged or defective devices must not be used.
– Damaged devices must be barred from further use and removed from the laboratory or classroom.
– Damaged connecting cables, tubing and hydraulic hoses represent a safety risk and must be
removed from the laboratory or classroom.
6
© Festo Didactic 8134684