Idiomas disponibles
Idiomas disponibles
120
76
REPLACING THE NAIL STRAIGHTENER
See Figure 3.
1. Remove o-rings (76) from nail straightener fixed pin (75).
2. Remove fixed pin (75).
3. Remove nail straightener (74), nail straightener spring (67) and
cushion (120).
76
4. Install new cushion (120) so that its flat side rests inside recessed hole
75
in the nailer.
5. Install new nail straightener spring (67) over tapered end of
67
cushion (120).
74
6. Install new nail straightener (74), making sure the nail straightener
spring (67) rests inside recessed hole on the nail straightener (74).
7. Install new fixed pin (75).
8. Apply a light coat of grease to new o-rings (76); install one on each side
of fixed pin (75).
Fig. 3
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 35, Hwy. 8
Pickens, SC 29671, USA
1-866-539-1710 www.RIDGID.com
RIDGID is a registered trademark of RIDGID, Inc., used under license.
