CoolFun CD28
To switch off the device,
– slide the switch to the "0" position,
– disconnect the plug.
6.3
Changing the lid
NOTE
I
Remember that the lid is only suitable for keeping cool and not for
active cooling.
As an alternative to the unit lid, you can use an insulating lid when transport-
ing the cooler.
Fold the handle of the cooler forwards.
Open the lid until it is vertical and then remove it by lifting it upwards.
Place the insulating lid with the guide lugs into the slots on the cooler.
6.4
Connecting to the cigarette lighter
NOTE
I
If you connect the cooler to the cigarette lighter, remember that the
ignition must be turned on to supply it with power.
7
Cleaning and maintenance
WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
Occasionally clean the device interior and exterior with a damp cloth.
All manuals and user guides at all-guides.com
Cleaning and maintenance
23