Storage And Transport; Fault/Remedy - ADE KG 2137 Instrucciones De Operación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
Cleaning
1. Take the dough container out of the cooking chamber and pull the dough hook off
the shaft.
If the dough hook is sticking to the shaft, add some water into the
container and wait for an hour. If the dough hook is still stuck, you can use
the dough hook removal tool to remove it. Try to get it under the dough
hook and then pull the dough hook upwards. Be careful not to accidentally
damage the coating of the dough container.
2. The dough container and the dough hook can be cleaned in the dishwasher or in
soapy water. All other accessories must not be cleaned in the dishwasher and need
to be cleaned by hand with soapy water.
3. Use a slightly damp cloth to wipe the outside of the housing clean.
4. Do not operate the appliance again until all parts are dry.
The dough container may become discoloured over time due to cleaning
in the dishwasher. This is normal and does not affect its function or the
flavour of the food.

Storage and transport

‚ The appliance should be cleaned and dried thoroughly.
‚ The original packaging may be used for additional protection.
‚ The storage location must be cool, dry and frost-free.

Fault/Remedy

Fault
No function.
There is a smell of burning.
The motor is not audible, or
there are no kneading sounds
(depending on the programme)
Bread Maker KG 2137
Possible Cause/Remedy
Mains plug in the socket?
Flour or other ingredients have got into the
cooking chamber.
1. Switch off the bread maker.
2. Let the appliance cool down completely.
3. Use a paper towel to remove any excess
flour or other ingredients from the cooking
chamber.
Dough container or dough hook may be
inserted or fitted incorrectly.
− Check the position of the dough container
and dough hook.
Dough container is overfilled.
− Remove ingredients.
Fault/Remedy
49
Tabla de contenido
loading

Tabla de contenido