Faber Skylift Manual De Uso página 6

Ocultar thumbs Ver también para Skylift:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Button Function
Turns the Motor On/Off.
Hood Closed:
ring the hood
- It will stop when the button is pressed
again.
When the movement has been com-
pleted the motor will start at speed 2.
Hood Open:
- Press and hold for 2 seconds to
activate raising of the hood, which
stops when it reaches the stop.
(before the stop is reached).
on/off.
- Press and hold for 2 seconds to
start raising of the hood.
motor and then start the movement.
Decreases the speed of the Motor.
Increases the speed of the Motor.
INTENSIVE
- This can only be activated with the
hood lowered and when the delay or
24h functions are not active.
- Activates Intensive speed from any
other speed.
To disable it, simply press the same
button again or turn the motor off.
- Intensive speed is timed to run for 10
minutes. At the end of the 10 minutes
the system will automati cally return
to the speed that was set before.
Can only be activated if the Intensive or
24h function is not active.
Activates and deactivates total shutdown
of the hood (motor+lights) after 30
minutes:To disable the Delay, simply
press the button again or turn the
motor off.
Press and hold for 2 sec. for the 24H
Function:
Can only be activated if the Intensive or
Delay function is not active.
Activates and deactivates the 24H fun-
ction for 10 minutes every hour, for 24
hours. After this time it is deactivated.
Turns the Hood lights On/Off.
6
Additional information for the installation
technician
Display
-
-
-
-
Procedure to be used in case of
malfunction on the movement:
1. Check that the fuse is properly inser-
ted and that it has not burned out, for
replacing the fuse open the lighting
unit and unscrew the fuser holder and
replace it with one having the same
characteristics (Rif.B).
-
-
level (the use of a spirit level is re-
The led on
commended).
the motor
3. Check that the four cables are all at
button (on
the hood
the same tension. The front left cable
controls)
must not be slacker than the others.
once a
If even these operations do not solve
second.
the problem contact the Technical
Assistance.
The led on
the motor
Lighting
button (on
the hood
controls)
• For replacement contact tech-
once
nical support ("To purchase
every 0.5
contact technical support").
seconds.
The led on
the motor
button (on
the hood
controls)
once every
2 seconds.
-
Tabla de contenido
loading

Tabla de contenido